Location: News > Industry Trends > Energy saving in smart lighting control systems < Back to List

Energy saving in smart lighting control systems

Release Time:2020-08-27 10:36:25 Browse:33times Responsible Editor:Qingdao Huarui Zhichuang Technology Co., Ltd.

    Smart lighting control systems are not only quick and easy to install—they also save energy for property owners and for society, while helping protect the environment. So what exactly does energy saving mean in a smart lighting control system? Today, someone from Huarui Zhichuang is here to explain.



    1. It reduces waste. In modern high-rise office buildings, wasted lighting energy is a serious issue—lights often stay on whether a room is occupied or not. A smart lighting control system enables both distributed control and centralized management. From the building's central control room, operators can switch off the lights in unoccupied rooms with a few keystrokes.


    2. Automatic dimming makes full use of natural light. Light sensors in a smart lighting control system measure the illuminance at the work surface and compare it with a preset value to control the lights, making full use of natural light to save energy. This also provides a relatively stable visual environment that isn't affected by the seasons or outdoor weather. Generally, the closer to a window, the higher the natural illuminance, and therefore the less artificial light is needed—but the combined lighting should remain at the designed illuminance level.


    3. Fast installation and reduced cabling. A smart lighting control system is controlled via two-core cable. Each input unit, output unit, and system component is connected through a bus. Large cross-section load cables run directly from the output unit to the lighting fixtures or other electrical loads, without passing through a smart switch. No control contacts need to be considered during installation. Once the entire system is installed, each unit's address is configured via software to establish the corresponding control links. Because the system only uses load cables between the output unit and the load, it saves a substantial amount of cable that would otherwise run to the main switch—compared with traditional control methods—shortening installation and construction time and reducing labor costs.


    4. Extended light source life. Overvoltage is a leading cause of light source failure. Controlling overvoltage is an effective way to extend light source life. A smart lighting control system uses soft-start to manage both voltage surges and impulses from the grid, protecting the filament from thermal shock and extending the service life of the light source. Smart lighting control systems can typically extend light source life by 2 to 4 times. This not only saves a large number of light sources, but also greatly reduces the workload of replacing them—effectively lowering the operating cost of the lighting system and avoiding the environmental pollution caused by disposing of discarded light sources.